Page 1
O N I O N S L I C E R OS-188 OS-250 Warranty Service To initiate warranty service contact: equipservice@wincous.com or call: 973-295-3899 DO NOT send unit to WINCO without first contacting our customer service department. For California Customers WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov 2020507...
Page 2
WINCO will not accept liability if: • The instructions in this manual have not been followed correctly.
• Wrench • Operating Instruction Manual WINCO® prides itself on quality and service, ensuring that at the time of packing, all products are supplied fully functional and free of damage. Should you find any damage as result of freight, please contact your WINCO® dealer immediately.
Page 4
PREPARATION Since the push assembly and blade block assemblies for different sized cuts are interchangeable, you may have more than one set available for use. Before slicing, please ensure that the push assembly is the correct one to use for the desired cut size. Gently lower the push assembly onto the blade block assembly to ensure that the push assembly rests on the bumpers.
5. Clean the machine after cutting is completed in accordance with the cleaning instructions. Having trouble getting started? Contact our service department at equipservice@wincous.com or 973-295-3899 DO NOT send unit to WINCO without first contacting our customer service department.
CLEANING Cleaning of the device is important to assuring optimal performance and longevity. Minimize the use of alkaline or acidic cleaners, as they may cause pitting and dulling of the finish. 1. Remove the pin on the push assembly, move the handle out of the way, and lift the push assembly off the guide rods.
30 days from the date of installation. WARRANTY SERVICE To initiate warranty service contact: equipservice@wincous.com or call: 973-295-3899 DO NOT send unit to WINCO® without first contacting our customer service department. Please provide or have the following information available: • Model Number • Operator / Installation Contact Information...