Disclaimers:
Sinexcel shall not be liable for any consequence caused by any of the following events:
Warranty expiration of the warranty service;
Failure to follow the operation instructions and safety precautions in this document, and
the resulting equipment malfunction, component damage, personal injuries, or property
damage are beyond the warranty scope;
Installation or use in environments which are not specified in related international
standards.
Incorrect transportation, removal, storage, installation, or use.
Unauthorized modifications to the product or software code or removal of the product;
Device damage due to force majeure (such as lightning, earthquakes, fire, and storms);
Unauthorized modifications to the product nameplate or serial number or product
appearance;
Storage conditions that do not meet the requirements specified in this document, unused
products should be stored in packing cases and placed in a dry, (After delivery shall be
started and test equipment operation status within 6 months, otherwise it shall be return
to Sinexcel for aging test and payable the shipping cost.);
Ensure that the area required for heat dissipation, Otherwise, the equipment may become
faulty, and the resulting equipment malfunction, component damage, personal injuries,
or property damage are beyond the warranty scope;
Installation or use by unqualified personnel;
This document content here is for indicative purpose only. If there is any inconsistency
between the content and the actual product, it should base on the actual product.
Notice:
Before connecting the power supply, ensure that electrical connections are correct. Do not
connect or disconnect power cables with power on.
Personnel who will operate the equipment, including operators, trained personnel, and
professionals, should possess the local national required qualifications in special operations such
as high-voltage operations, working at heights, and operations of special equipment.
Copyright @ Shenzhen Sinexcel Electric Co.Ltd.2022. All rights reserved.
SEC Series DC Distributed Charger – User Manual
Need help?
Do you have a question about the SEC Series and is the answer not in the manual?