Preparing Cappuccino - Silvercrest 321581 1901 Operating Instructions Manual

Preparing cappuccino

1) Ensure that there is enough water in the water tank
necessary.
2) Ensure that there is enough milk in the milk tank
3) Select whether you want prepare a cappuccino with a single or double
espresso and fit the corresponding espresso sieve
.
4) Add the espresso powder to the espresso sieve
holder
5) Place a suitable cup on the drip grille
you may also want to pull out the tray for small cups
on this.
6) Set the milk nozzle
7) Use the "Milk quantity" knob
your cappuccino:
Turn the "Milk quantity" knob
the "Milk quantity" knob
sure you do not turn the knob further than the " " marking. Otherwise you
will be in cleaning mode (see section "Cleaning and care").
NOTE
► You can even correct the amount of milk during preparation by turning the
"Milk quantity" knob
8) Switch the appliance on using the on/off switch
lamps light up permanently. The appliance has now heated up.
9) Press the "Small" cappuccino button
cappuccino. The control lamp for the "Small" cappuccino button
Press the "Large" cappuccino button
cappuccino. The control lamp for the "Large" cappuccino button
lights up.
10) The appliance starts the brewing process; the corresponding control lamp
flashes during the preparation.
11) Wait until the espresso has stopped flowing out of the espresso outlet
the milk has stopped flowing out of the milk nozzle
light up. You can now remove your cappuccino.
SEMM 1470 A1
.
so that it is pointing into the cup.
to the right to increase the amount of milk. Make
.
. Add more water if
. Add more milk if necessary.
and fit the sieve
. Depending on the size of the cup,
to set how much milk you want to use for
to the left to reduce the amount of milk. Turn
and wait until all control
if you want to prepare a single
if you want to prepare a large
GB │ IE │ NI
in the sieve holder
and place the cup
lights up.
,
and all control lamps
│
17 ■