Preparing Cappuccino - Silvercrest SEM 1100 D3 Operating Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

NOTE
If the "Espresso"
about 30 minutes, the appliance switches off automatically .
9) After every use, remove the used espresso powder from the espresso sieve o p .
Remove the sieve holder i from the appliance . To do this, fold the sieve
blocker u upwards so that the espresso sieve o p cannot fall out of the
sieve carrier i . Now empty the espresso sieve o p by turning the sieve
holder i and the blocked espresso sieve o p over and knocking the
espresso powder out . Always dispose of the espresso powder in an environ-
mentally friendly manner, e .g . with the organic waste .
NOTE
Clean the hot water shower r (the hot water comes out of this) after each
use . See also the section "Cleaning and Care" .
NOTE
Empty the drip tray w regularly, at the latest when the red float e is visible
in the hole of the drip grille q .

Preparing cappuccino

WARNING
Be careful when working with steam for the milk froth production!
The hot steam or hot splashes can lead to injuries!
Always operate the steam control 7 slowly .
1) Fill a container for frothing (preferably made of stainless steel) to one third
with cold milk .
2) Ensure that the steam control 7 is closed (turn it as far as it will go in the
direction " ") .
3) Push the milk frother 0 out to the side . Always hold it by the handle 8 .
4) Press the "Steam" button
lights up continuously .
5) Hold an empty container under the milk frother 0 . Slowly turn the steam
control 7 in the direction " " . Pressurised water/spray comes from the noz-
zle . This cleans the nozzle and the water circuit inside the appliance .
6) Wait 15 seconds and turn the steam control 7 towards " " until no more
steam comes out of the nozzle . Pour the water in the container away .
7) Now hold the frothing container in your hand to feel the milk temperature
and guide the nozzle of the milk frother 0 gently into the milk . Hold the
frothing container at a slight angle .
SEM 1100 D3
3 or "Steam"
4 buttons are not pressed for
4 . Wait until the "Steam" control lamp 5
GB │ IE │ NI │ CY
 13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents