Power Supply Indicator - Supermicro Storage SuperServer SSG-641E-E1CR36H User Manual

Table of Contents

Advertisement

Item
Description
1
PCIe 5.0 x8 low-profile slot (occupied by 3908 or 3808 SAS controller)
2
PCIe 5.0 x16 low-profile slot (occupied by AOM for external SAS)
3
PCIe 5.0 x16 low-profile slot
4
PCIe 5.0 x16 low-profile slot
5
PCIe 5.0 x16 low-profile slot
6
PCIe 5.0 x8 low-profile slot
Note: PCIe slot 1/2 is occupied by the JBOD Expansion/Storage Controller.

Power Supply Indicator

LED Color and State
Off
Amber, solid
Amber, blinking
Green, blinking
Green, solid
Expansion Card Chassis Slots
Power Supply Indicator
Power Supply Condition
No AC power to modules
AC cord unplugged and in redundant mode OR power supply critical events causing
a shutdown, failure, OCP, OVP, fan fail, OTP, UVP
Power supply warning events where the power supply continues to operate: high
temperature, over voltage, under voltage, etc
AC present, only 12vsb on (module off)
Output on, functioning normally
14
Chapter 1: Introduction

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storage superserver ssg-641e-e1cr36l

Table of Contents