HIKVISION UD04294B Quick Start Manual page 21

Network Turret Camera·Quick Start Guide
2. Drill screw holes and the cable hole (optional) on the wall
according to the supplied drill template.
Note:
Drill the cable hole, when adopting ceiling outlet to route the cable
3. Disassemble the inclined base by the screw driver.
4. Install the turret camera's mounting base on the inclined base
cover with three PM4 screws.
Figure 2-10 Fix Camera's Mounting Base
5. Install the inclined base's body on the ceiling/wall with four
PA4×25 screws.
Figure 2-9 Drill Template
20