Table of Contents
Advertisement
Network Turret Camera·Quick Start Guide
5. Route the cables through the cable hole or the side opening.
6. Install the camera body back to the mounting base.
7. Connect the power cord and network cable.
8. Power on the camera, and set the network configuration (for
details, refer to 3 Setting the Network Camera over the LAN and 4
Accessing via Web Browser) to check whether the image is gotten
from the optimum angle. If not, adjust the surveillance angle.
Figure 2-4 Install the Camera Body
Figure 2-5 Adjust Surveillance Angle
16
Advertisement
Table of Contents
