Table of Contents
Advertisement
10. Hold the Rear Upright Cover (21) against the
Console (3).
See step 8. Tighten the five M4 x 16mm
Screws (67).
Next, press the tabs on the Front Upright Cover
(20) into the Rear Upright Cover (21). Then,
attach the Front Upright Cover to the Upright (2)
with an M4 x 16mm Screw (67).
11. Identify the Right Handlebar (11).
Attach the Right Handlebar (11) to the Right
Handlebar Arm (13) with three M8 x 25mm
Flat Head Screws (68); start all the Flat Head
Screws, and then tighten them.
Attach the Left Handlebar (10) in the same
way.
12. Attach the right Handlebar Cover (31) to the
Right Handlebar (11) with three M4 x 16mm
Screws (67); start all the Screws, and then
tighten them.
Attach the left Handlebar Cover (31) in the
same way.
10
3
21
11
10
12
31
10
67
20
2
13
11
68
11
31
67
Advertisement
Table of Contents
