Table of Contents
Advertisement
• Your pace
• The speed of the walking belt
• The average speed of the walking belt
• A track representing 1/4 mile (400 m)
If desired, adjust the volume by pressing the
volume buttons on the console.
To pause the workout, tap the screen or press the
Stop button on the console. To continue the work-
out, touch the Resume button or the Start button.
To end the workout, touch the Finish button.
6. Measure your heart rate if desired.
If you use a chest heart rate monitor, you must put
it on before you start the walking belt. The con-
sole will automatically search for the chest heart
rate monitor for 30 seconds when you start the
walking belt at the beginning of each workout.
Note: If you use the handgrip heart rate monitor
and a chest heart rate monitor at the same time,
the chest heart rate monitor will have priority.
For information about purchasing an optional
chest heart rate monitor, see page 30. Note:
The console is compatible with Bluetooth
heart rate monitors.
Before using
the handgrip
heart rate
monitor,
remove the
sheets of
plastic from
the metal
contacts (L).
In addition,
make sure
that your hands are clean.
Smart
®
L
24
To measure your heart rate, stand on the foot
rails and hold the contacts with your palms for
approximately ten seconds; avoid moving your
hands. When your pulse is detected, your heart
rate will be shown. For the most accurate heart
rate reading, continue to hold the contacts for
about 15 seconds.
7. Turn on the fan if desired.
The fan features several speed
settings. Press the fan buttons
repeatedly to select a fan speed
or to turn on or turn off the fan.
8. When you are finished exercising, remove the
key from the console.
Step onto the foot rails and press the Stop button
on the console or tap on the screen. Next, touch
the End button. A workout summary will appear on
the screen. If you wish to save your workout for
future use, you can add it as a favorite by touch-
ing the heart button on the screen. You may also
be able to either save or publish your results using
one of the options on the screen. Then, remove the
key from the console and put it in a secure place.
When you are finished using the treadmill, press
the power switch into the off position and unplug
the power cord. IMPORTANT: If you do not do
this, the treadmill's electrical components may
wear prematurely.
ETNT11219
Advertisement
Table of Contents
