ICON PRO-FORM 495Pi Cooling Breeze User Manual page 8

AttacheachExtension L eg(63)withtwo1"TekScrews
(39)anda ThickBasePad(57)asshown, A ttachthe
towerTekScrew,withoutthe Thick BasePad,first.
Attach twoThickBasePads(57)tothebaseofthe
Uprights (69)withtwo1"TekScrews (39),
Attach thetwoWheeUs (66)withtwo2"BoUts (64)and
twoWheeU N uts(32)asshown, D onot overtightenthe
Bolts;theWheeUs shouUd beabb tospinfreeUy,
WiththeheUp o fanother p erson, c arefully raisethe
Uprights (69)tothevertbaU p osition,
Seestep2,Tighten thetwoHandrail BoUts (37),
4
/
66
64
..... _39
69
66 64
Hold the Console Base (47) near the Left Handrail (71),
Attach the end of the ground wire on the Console Base
to the indicated small hob in the Left Handrail with the
Silver Ground Screw (75),
Small
71
47
Ground
Wire
Touch the Right Handrail (72} to discharge any static.
Press the end of the Upright Wire (42) into the socket in the
bottom of the Console Base (47), The connector shouJd
sJide easily into the socket and snap into place, if the
connector does not slide easily and snap into place, turn
the connector and then insert it,
42
47
8