Download Print this page

ICON PRO-FORM 495Pi Cooling Breeze User Manual page 11

Advertisement

CONSOLE DmAGRAM
m
FAT
OALS.
PULSE
TIME
DUSTANOE
SPEED
Pube Sensor
\
Key
Cli
Note: if there is a thin sheet
of pUastb on the consob,
remove the pUastb,
CAUTION: Before oporot ng
the
console,
read the following
precautions.
o Do not stand on the walking
belt when turn-
ing on the power.
* Always wear the clip (see the drawing
above) while operating
the treadmi&
o Adjust the speed in small increments to
avoid sudden
jumps in speed.
o To reduce the possibility
of electric shock,
keep the console
dry. Avoid spilling
liquids
on the console
and place onJy a seaJed
water bottJe in the accessory
trays.
STEP-BY-STEP
CONSOLE OPERATION
Before operating the console, make sure that the
power cord is properly plugged in (see page 10),
in addition, make sure that
the reset/off circuit breaker,
located on the treadmill frame
near the power cord, is in the
reset position,
Reset
Next, stand on the foot rails of the treadmill, Find the
clip attached to the key (see the drawing above), and
slide the clip onto the waistband of your clothes,
insert the key into the console, A tone wiii sound and
the three displays wiii light, Test the cJip by carefully
taking a few steps backward
until the key is pulled
from the consote. If the key is not pulled from the
console,
adjust the position
of the clip.
Follow the steps below to operate the console,
Insert the key into the console.
When the key is inserted, a tone wiii sound and
the three displays wiii light,
Press the Speed + button to start the walking
belt.
A moment after the button is pressed, the walking
belt will begin to move, Hold the handrails and
begin walking,
As you exercise, change the speed of the walking
belt as desired by pressing the Speed + and -
buttons, Each time a button is pressed, the speed
setting wiii change by 0,1 mph; if a button is held
down, the speed setting wiii change in increments
of 0,5 mph, To change the speed setting quickly,
press the Quick Speed buttons, Note: The con-
sole can display speed and distance
in either
miles or kilometers
(see SPEED DISPLAY on
page !2). For simplicity,
aH instructions
in this
section refer to miles.
11

Advertisement

loading

This manual is also suitable for:

831.295231