Advertisement
Assemblyrequirestwo persons.SetthetreadmHU
ina cleared areaandremove aHpacking materiaUs, Donot
dispose ofthepacking materiaUs
untilassemMy is compbted,
Note:Theunderside o fthetreadmill walking beltiscoated withhighoperformance
lubricant, During shipping, a
small a mount o f lubricant maybetransferred t othetopofthewalking beltortheshipping carton, T hisis a normal
condition anddoesnotaffecttreadmill performance, if thereis lubricant ontopofthewalking belt,simply wipeoff
thelubricant witha softclothanda mild,nonoabrasive cleaner,
E
Assembly
requires
the included
allen wrenches
_ and your own phillips
screwdriver
rubber mallet _x(_,
and adjustable
wrench
_
.
For help identifying
the assembJy hardware,
see the drawings
below, if a part is not in the parts bag, first
check to see if it has been pre-assembled,
If a part is missing,
call toll-free
1-888-533-1333.
Silver Ground
Screw (75)-1
1/2" Screw (48)-10
Wheel Nut (32)-2
3/4" Screw (2)-2
1" Tek Screw (39)-6
2" Bolt (64)-2
Handrail Bolt (37)-4
1, Make sure that the power cord is unplugged.
With the help of another person, carefully raise the
Uprights (69) to the vertical position, insert one of the
Extension Legs (63) into the treadmill as shown, (Note: it
may be helpful to tip the Uprights as you insert the
Extension Leg,) Make sure that the Base Pad (61) is
under the Extension Leg,
insert the other Extension Leg (63) in the same way,
63
61
Advertisement
