Table of Contents
Advertisement
TROUBLESHOOTING
Check the following points before requesting service.
© Power cord not properly plugged into outlet.
¢ INPUT control set to "O"
¢ DRY and EFFECT controls set to "O".
No
effect
¢ EFFECT control set to "0"
Cener:
* BYPASS switch is depressed.
No sound.
Low output volume
* Connected to audio amplifier, but LEVEL switch is set to +4 dB.
| Sound is distorted.
¢ Connected to a professional equipment, but LEVEL switch is set to — 20 dB.
No stereo effect.
Input is a monaural signal.
p
sac bGtiGne
Ab ROR
e EDIT indicator flashes.
or aC eUnoN
¢ EQ button indicator flashes.
WOTK.
¢ FLAT button indicator flashes.
¢ MIDI reception channel of MU-R201 and transmission channel of other equipment are not
MIDI control not possible.
matched.
¢ Control numbers do not match.
Sony Sound Tec Corporation —_ Printed in Japan
Advertisement
Table of Contents
