Table of Contents
Advertisement
Press the MIDI CH button.
Shows controlller number.
Lights
=
Use + and — to set the controller number (OFF, 1—124).
ve
(The unit is factory preset to "OFF")
PHASE
MIDI CH
"st
DATA
Shows MIDI reception
channel.
MIDI reception channels from "0" to "16" can be selected.
© 0:OMNI ON (all channels from 1 to 16 are received).
© 116: OMNI OFF (only the selected channel is received)
Select the channel with the + and — keys.
Damper pedal
Portament
Sostenuto
Soft pedal
Data increment
Data increment
Key velocity
Channel key pressure
Note number (for Note On only)
Numbers 122, 123, and 124 do not use the control chanywe
signal. For these numbers, the key velocity, channel key
pressure, and note number signals are used to control the
effect level.
Note
Memory changes with the program change signal are possible
only during use of the MEMORY function.
Effect level control with the control change signal is possibile
during use of all functions.
Some MIDI equipment may not be able to supply all signals.
Refer to the instruction manual of the respective equipment
for details.
Advertisement
Table of Contents
