Sony MU-R201 Operating Instructions Manual page 30

USING MIDI CONTROL (mip FUNCTION)
When MIDI program change signals and control change signals are used to control the MU-R201, the program contents can be
changed as follows. The function of the parameter buttons is as shown by the yellow lettering.
Press PGM NO (to check the Press the MEMO NO button (to
1 Press MIDI.
2 f
:
corresponding memory number). change the corresponding
memory number).
Lights
Ge
The indicators of parameter buttons
are flashing.
—
MEMORY MODE CH DATA
Memory number of
MU-R201 corresponding MIDI program = |
to MIDI program number number
When the program number is changed with
the + and —, the corresponding memory
numbers are shown.
When the MIDI program change signal is The corresponding memory number can be
received, the received program number is changed with + and ~.
displayed, which permits a check of
corresponding numbers. Present memory User memory
ooo ee FT
+ key ---- (700.401. 99. 00+ 01-995
~~ [004-0199 00+01- 99.4
Factory-set memory numbers Repeating the memory number change
-
a =
aemerece
By repeating steps 2 and 3, the memory numbers
MIDI program number
| "Memory number of MU-R201
corresponding to other program numbers can be changed.
; a After all desired changes were made, set the unit to the
0-98 peer memo. re MEMORY function.
ie 100—127 Preset memory 00.—27.
@