Table of Contents
Advertisement
The following descriptions and recommendations are intended only as a general guideline.
Many other uses of the MU-R201 are possible, limited only by your own imagination and creativity.
Standard
patterns
Recording,
instrument
use
ne
adjust E. RFL. L. to change the size of the stage. The solid fundamentals of
can be further enhanced by boosting the LOW setting of the equalizer.
Room
preset, Set REV. T to about 0.3 to 1.0, and add some equalization.
The characteristics of plate reverberation, which is most commonly used in
conventional plate reverberation, are also handled effortlessly.
Gate reverb is most effective with dynamic percussive sounds such as kick
Gate Reverb
Reverse reverb, which previously could be produced only by playing a tape
04.
Reverse Reverb
DT and GATE to match the sound peaks is an important point.
Delay
1000 ms delay.
Flash Panning
sky. It can lend a "spacelike" quality to solo instruments.
Simulated characteristics of famous, comparatively large concert halls are stored in
this preset. Increase PRE. DT when wishing to increase the sense of depth, and
the hall
is
drum or
n this
|
07.
Dual Reverb
08.
Reverb & Gate
or kick drum.
10.
Large Hall
chorus, etc. Characteristics are that of a well controlled hall.
11.
Medieval Hall
glass wails. Suitable for wind instruments.
channel 2 to channel! 1.
=
concer ial
for chamber music or a small orchestra.
Advertisement
Table of Contents
