Table of Contents
Advertisement
This mode creates the reverberation of a comparatively small
location such as an echo room or a smaller club. As with
mode 0, the application range is wide and varied.
Reverberation is tight and fairly sharp, resulting in a controlled
and lively sound stage.
Basic parameters
REV. T.
0.07—24.75sec
PRE. DT
1—733msec (CH1, 2)
E. RFL. T.
{—733msec (CH1, 2)
0.000—=0.992 (CH1, 2)
+designates the phase (set with PHASE)
0.01—0.99
DRY
60dB
Level
RT HIGH
IE. RFL. Tt. 2
PRE. DT1. 2
One-point advice
The setting procedure of mode 1 is basically the same as for
mode 0. For simulating a setting such as small live-
performance club, RT HIGH and SPREAD should be carefully
controlled. The following values may serve as a guideline.
REV. T.
0.70—1.00sec
20—80msec
8—50msec
RT HIGH
SPREAD
PRE. DT, E. RFL. T, and E. RFL. L. can be set for each channel
separately, which may be used to emphasize the feeling of an
intimate, live setting. The four-band equalizer can also be used
to create a particular sound character.
0.40—0.80 (Determines "liveness")
3—6
(Keep spread to a somewhat lower value.)
Advertisement
Table of Contents
