Table of Contents
Advertisement
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Zipper/piping Insertion
A zipper and piping can be sewn in place.
Stitch Name Pattern
Straight stitch
(left needle
position)
There are many methods for inserting zippers and pipings. The procedures for inserting a centered zipper
and a piping are described below, with the adjustable zipper/piping foot.
Inserting a centered zipper
a
Refer to step
zipper" (page 96).
Remove the presser foot and presser foot
b
holder (page 46) to attach the screw-on
adjustable zipper/piping foot.
Note
Use a screw driver to securely tighten the
screw that holds the presser foot. If the screw
is loose, the needle may break and cause
injures.
Select stitch
c
Application
1
Attaching zippers Sewing
concealed seams and piping
a
e
–
of "Inserting a centered
1
.
Stitch Width
[mm (inch)]
Auto
Manual
Auto
0.0
0.0–7.0
2.5
(0)
(0–1/4)
(3/32)
d
Loosen the positioning screw on the back of
the presser foot.
a Positioning screw
e
Slide the presser foot over either the left or
right feed dog.
Left sewing position
f
Change the needle position so that the needle
does not touch the presser foot.
For details, refer to "Adjusting the stitch width"
(page 58).
a Needle drop point
Zipper/piping Insertion 101
Stitch Length
Presser
[mm (inch)]
Foot
Manual
0.2–5.0
(1/64–3/16)
1
Right sewing position
1
3
Advertisement
Table of Contents
