Brother 885-U02 Operation Manual page 39

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
g Thread the upper thread in the same way that
the upper thread for the left side was threaded.
a Thread guide cover
• For details, refer to steps
"Threading the upper thread" (page 32).
h Without passing the thread through the needle
bar thread guide, manually thread the right
needle.
Pass the thread through the eye of the needle
from the front.
• The needle threader cannot be used with the
twin needle. If the needle threader is used
with the twin needle, the sewing machine
may be damaged.
i Attach zigzag foot "J".
• For details on changing the presser foot, refer
to "Replacing the Presser Foot" (page 44).
CAUTION
● When using the twin needle, be sure to
attach zigzag foot "J". If bunched stitches
occur, use presser foot "N" or attach
stabilizer material.
1
h j
through of
j Turn on the sewing machine and select a stitch.
• For stitch selection see "Selecting stitching"
(page 51).
• See "Stitch Setting Chart" (page 70) for
stitches that use a twin needle.
Note
When using the pintuck foot (sold
separately) to sew straight pintucks with the
twin needle, select the stitch with the center
needle position.
CAUTION
● When using the twin needle, be sure to
select an appropriate stitch, otherwise the
needle may break or the machine may be
damaged.
k Press .
The screen for setting the twin needle
appears.
l Press .
displays in reverse highlight.
• If pressed again, it returns to
The twin needle can now be used.
.
Upper Threading 37
1