Table of Contents
Advertisement
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
SEWING BASICS
Insert the foot controller plug into its jack on
b
the right side of the sewing machine.
1
a Foot controller jack
Turn on the sewing machine.
c
Slide the sewing speed controller to the left or
d
right to select the foot controller's maximum
sewing speed.
Slide the sewing speed controller to the left to
select a lower maximum sewing speed, or slide
the speed controller to the right to select a
higher maximum sewing speed.
a Sewing speed controller
Once you are ready to start sewing, slowly
e
press down on the foot controller.
Pressing down on the foot controller increases
the sewing speed; releasing the pressure on the
foot controller decreases the sewing speed.
• Slowly press down on the foot controller.
Pressing it down hard starts sewing too
quickly.
The machine starts sewing.
54
f
g
h
1
● Do not allow thread or dust to accumulate
● Do not place objects on the foot
● If the machine is not to be used for a long
Slower
Faster
When the end of the stitching is reached,
completely release the foot controller.
The machine stops sewing with the needle
lowered (in the fabric).
When you have finished sewing, press
(Needle position button).
The needle is raised.
Cut the threads.
• For details, refer to "Cutting the thread" (page
56).
Memo
When the foot controller is plugged in,
(Start/stop button) cannot be used to start
sewing.
When sewing is stopped, the needle remains
lowered (in the fabric). The machine can be
set so that the needle will stay up when
sewing is stopped. For details on setting the
machine so that the needle stays up when
sewing is stopped, refer to "Changing the
machine settings" (page 21).
CAUTION
in the foot controller, otherwise a fire or
an electric shock may occur.
controller, otherwise damage to the
machine or injuries may occur.
period of time, unplug the foot controller,
otherwise a fire or an electric shock may
occur.
Advertisement
Table of Contents
