SN200/210 Integrated Wired
With and Without MELR Option (Electric Latch Retraction)
6A Inside Mounting Plate and Wire Connections (Non-MELR)
1. Attach mounting plate using (2) #8 x 1/2" self-drilingl screws (Fig. 6a).
2. Connect 6- and 2-pin connectors from device to 6- and 2-pin connectors on reader
harness (Fig. 6b, c).
3. Connect ElectroLynx 4- and 8-pin connectors from the door harness to (black) 4- and 8-pin connec-
tors of the SN200/210 harness (Fig. 6d).
Inside of Door
NOTE: Neatly fold excess wires into remaining space to prevent pinching
Copyright © 2020-2023 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights
reserved. Reproduction in whole or in part without the express written permission of
ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Inside of Door
Fig. 6a
SN200/210 Harness
wires when mounting inside escutcheon (Fig. 6e).
Fig. 6b
Fig. 6d
4-pin
15
Fig. 6c
8-pin
ElectroLynx
Elec-
troLynx
Fig. 6e