Safety Instructions; Symbol Meaning; Safety Alert Symbol - EGO HTX5300-P Operator's Manual

56 volt lithium-ion commercial short fixed pole hedge trimmer
Hide thumbs Also See for HTX5300-P:
Table of Contents

Advertisement

READ ALL INSTRUCTIONS!
READ OPERATOR'S MANUAL
Residual risk!
People with electronic devices, such
as pacemakers, should consult their physician(s) before
using this product. Operation of electrical equipment
in close proximity to a heart pacemaker could cause
interference or failure of the pacemaker.
WARNING:
To ensure safety and reliability, all repairs
and replacements should be performed by a qualified
service technician.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention
to possible dangers. The safety symbols and the
explanations with them deserve your careful attention
and understanding. The symbol warnings do not, by
themselves, eliminate any danger.
The instructions and warnings they give are no substitutes
for proper accident prevention measures.
WARNING:
Be sure to read and understand all safety
instructions in this Operator's Manual, including all safety
alert symbols such as "DANGER," "WARNING," and
"CAUTION" before using this machine. Failure to follow all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.

SYMBOL MEANING

SAFETY ALERT SYMBOL:

WARNING, or CAUTION. May be used in conjunction with
other symbols or pictographs.
WARNING:
The operation of any machines can result
in foreign objects being thrown into your eyes, which can
result in severe eye damage. Before beginning machine
operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed.
We recommend a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields.
56 VOLT LITHIUM-ION COMMERCIAL CORDLESS SHORT FIXED POLE HEDGE TRIMMER — HTX5300-P
Indicates DANGER,

SAFETY INSTRUCTIONS

This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate it.
Safety Alert
Read Operator's
Manual
Wear Eye
Protection
Danger- Keep
Hands Away from
Blades
XX
Noise
WEEE
Ingress
IPX5
Protection (IP)
Rating
n
No Load Speed
0
V
Volt
Direct Current
(DC)
.../min Per Minute
mm
Millimeter
kg
Kilogram
°C
Degrees Celsius Temperature
Indicates a potential
personal injury hazard.
To reduce the risk of
injury, user must read the
operator's manual.
Always wear safety goggles
or safety glasses with side
shields and a full face
shield when operating this
product.
Contact with blade will
result in serious personal
injury.
Guaranteed sound power
level.
Waste electrical products
should not be disposed of
with household waste. Take
to an authorized recycler.
Protected against water jets
Rotational speed, at no load
Voltage
Type or a characteristic of
current
Revolutions per minute
Length or size
Weight
5

Advertisement

Table of Contents
loading

Table of Contents