Using The Keep Warm Plate - Cuisinart ICE48U Manual

dispensed effectively onto the ice cream. It is recommended that
the topping containers are emptied, when not in use.
NOTE: To ensure the toppings are the correct size for dispensing,
it is recommended that the topping containers are filled using the
mix-in gauge included.

Using the Keep Warm Plate

The keep warm plate can be used to keep sauces and toppings warm.
To switch on, simply turn the dial on the side of the ice cream maker to
'keep warm' .
Note: The keep warm plate should not be used to warm up sauces or
to melt chocolate. It will only keep pre-warmed sauces and toppings
warm, until ready to serve.
MOTOR OVERLOAD PROTECTION
The Soft Serve Ice Cream Maker features overload protection, that
will shut the motor off if it overheats. This may occur if the dessert is
extremely thick or the unit has been running for an excessively long
time. This may also occur if the mixing paddle is being obstructed and
not turning.
To reset this, unplug the unit. Let the unit rest for at least 20 minutes.
After 20 minutes, you may turn the unit on again.
If the ice cream over freezes and stops the mixing paddle from churning
and becomes too thick to dispense, stop the machine, remove the
ice cream bowl and scoop the ice cream out, into a suitable airtight
container, for freezer storage.
14