Two notes Audio Engineering Torpedo Captor X SE User Manual page 27

2023/09/21 16:36
It is possible to set different behaviors to the SPACE Knob:
SPACE knob
assignement
4.2.4 "BYPASS Torpedo Processing"
When the BYPASS button is activated on the Right output channel, the whole Torpedo
process is bypassed. In this instance, the Right XLR output will only send the dry amp sound.
This is an ideal setup when you wish to record your amp with capabilities to record the full
cab sim signal from the Left XLR output, while at the same time recording the dry amp sound
from the Right XLR output. In this scenario, the dry amp tone can be processed at the
mixdown stage with the bundled Wall of Sound Plugin.
5. TUNER
6. VOICING knob
On the front panel of Captor X SE, the VOICING control allows you to adjust the global
sound of the unit sent via the XLR outputs. It is a simple one band equalizer that is
centered at 900 Hz with a -12 to +12 dB range.
User's manuals - https://wiki.two-notes.com/
27/43
Behavior
The SPACE knob controls the DRY/WET REVERB level for both XLR
outputs.
The SPACE knob controls the DRY/WET REVERB level for the Left XLR
output.
The SPACE knob controls the DRY/WET REVERB level for the Right XLR
output.
Access the TUNER by clicking on the fork button at the bottom of the
Room image. The TUNER is fully chromatic with facilities to set the
base tuning point in the Setup Manager window anywhere between
410hz and 490hz - by default, the tuner is set to 440hz.
Torpedo Captor X SE User's Manual