Two notes Audio Engineering Torpedo Captor X SE User Manual page 22

Last
update:
torpedo_captor_x:torpedo_captor_x_se_user_s_manual https://wiki.two-notes.com/doku.php?id=torpedo_captor_x:torpedo_captor_x_se_user_s_manual
2023/09/21
08:38
3. Creating a preset with a 3rd-party IR
The Captor X SE can load up to 512 IRs. All imports of IRs are actioned via Torpedo Remote through
the IR MANAGER tab (via computer only). Upon upload into the Captor X SE, the IR's length can be set
to 20, 40, 100 or 200 ms long. If the IR is longer it will be shortened by Torpedo Remote to the
selected length; if it is shorter it will be extended (filled with zeros) to the selected length.
The internal memory has the following allowances regarding the length of the IR:
512 slots for 20ms IRs, in 4 banks of 128 slots
256 slots for 40ms IRs, in 4 banks of 64 slots
84 slots for 100ms IRs, in 4 banks of 21 slots
44 slots for 200ms IRs, in 4 banks of 11 slots
3.1 IR choice
To use custom made IRs with Torpedo BlendIR or 3rd-party IRs, you first need to select the IR Loader
mode in Torpedo Remote. This window features a similar layout to the CABINET MANAGER pane in
Torpedo Remote. Here, you can load one IR per channel, and have full control over each channel via
dedicated mute, bypass, phase, and volume controls. In addition, you can further refine your tone via
https://wiki.two-notes.com/ Printed on 2023/09/21 16:36