Two notes Audio Engineering Torpedo Captor X SE User Manual page 14

Last
update:
torpedo_captor_x:torpedo_captor_x_se_user_s_manual https://wiki.two-notes.com/doku.php?id=torpedo_captor_x:torpedo_captor_x_se_user_s_manual
2023/09/21
08:38
5.4 Recording your amp silently
https://wiki.two-notes.com/
Connect
your amp's
output to
the
SPEAKER
INPUT of
Captor X SE,
indicated by
a red bolt -
ONLY use a
speaker
cable for
this
connection.
In Torpedo
Remote,
select the
DUAL/MONO
routing and
bypass the
Torpedo
Processing
on the
RIGHT
output. The
left XLR
output will
send the full
Torpedo
signal, while
the right
XLR output
will send
the dry
signal of the
amp to the
interface in
order that
you can add
the cabinet
simulation
with
Torpedo
Wall of
Sound
(download
included) in
your DAW.
Printed on 2023/09/21 16:36