Two notes Audio Engineering Torpedo Captor X SE User Manual page 25

2023/09/21 16:36
Please note, the TWIN TRACKER is only available in STEREO routing. When on, the WIDTH of the
REVERB is automatically set to 100%.
4.1.2 Stereo REVERB
In stereo, you can set the stereo size of any room simulation with the WIDTH parameter: from mono
(knob turned all the way to the left) to full stereo (knob turned all the way to the right).
4.1.3 SPACE knob assignement
On the front panel, the SPACE knob allows you to control one parameter on the fly. You can
assign the behavior of the SPACE control in Torpedo Remote via the purple button below
located below the SPACE knob.
Here are the different assignment possibilities:
There are two possible behaviors. Either, TWIN TRACKER is OFF: the SPACE knob is assigned
to the WIDTH of the REVERB. Or, TWIN TRACKER is ON: the SPACE knob is assigned to the
TIGHTNESS of the TWIN TRACKER. The WIDTH of the REVERB is automatically set to 100%.
The SPACE Knob is assigned to the DRY/WET level of the REVERB.
4.2 DUAL MONO Routing
This routing option allows you to send independent signals from each XLR output; you will be able to
set a different EQ and DRY/WET REVERB level on the right XLR output. The layout of the Torpedo
Remote will show you an additional EQ next to the right output fader.
User's manuals - https://wiki.two-notes.com/
25/43 Torpedo Captor X SE User's Manual