Table of Contents
Advertisement
Last
update:
torpedo_captor_x:torpedo_captor_x_se_user_s_manual https://wiki.two-notes.com/doku.php?id=torpedo_captor_x:torpedo_captor_x_se_user_s_manual
2023/09/21
08:38
A - Power the unit with the supplied adapter (only use correctly rated power supply)
B - Send STEREO, DUAL MONO or DRY/WET signals through the XLR DI outputs
C - Eliminate unwanted hum caused by ground loops
D - Ensure the fan is kept clear
E - Connect the supplied ⅛" jack to MIDI cable adapter for MIDI control
F - Control Captor X SE from a computer (Windows or macOS) via Torpedo Remote (USB cable
included)
G - Connect a speaker cabinet here with a ¼" jack SPEAKER cable
H - Choose your cabinet volume level:
Low position is "Home" level
Halfway position is "Club" level
Full position is "Stadium" level
I - Connect your amplifier's output here with a ¼" jack speaker cable (100W RMS max admissible
power)
5. Connecting the Captor X SE
Here are the most common use cases when it comes to setting up your Captor X SE and the rest of
your equipment.
5.1 Using the attenuator with your cabinet
https://wiki.two-notes.com/
Printed on 2023/09/21 16:36
Advertisement
Table of Contents
Need help?
Do you have a question about the Torpedo Captor X SE and is the answer not in the manual?
Questions and answers