Advertisement
Equipment to Make Cabin More Comfortable
Manual Climate Control System
How to Use the Manual
Climate Control System
Heating
1. Start the engine.
2.
3. Set the air intake selector to the
outside air position (indicator light
turns off).
4. Set the temperature control dial to
the hot position.
5. Set the fan control dial to the
desired speed.
6. If dehumidified heating is desired,
turn on the air conditioner.
NOTE
If the windshield fogs up easily, press
the
switch.
If cooler air is desired at face level,
press the
switch and adjust the
temperature control dial to maintain
maximum comfort.
The air to the floor is warmer than air
to the face (except when the
temperature control dial is set at the
extreme hot or cold position).
Cooling
1. Start the engine.
6-16
2.
3. Set the temperature control dial to
the cold position.
4. Set the fan control dial to the
desired speed.
5. Turn on the air conditioner by
pressing the A/C switch.
6. After cooling begins, adjust the fan
control dial and temperature
control dial as needed to maintain
maximum comfort.
CAUTION
If the air conditioner is used while
driving up long hills or in heavy traffic,
monitor the high engine coolant
temperature warning light to see if it is
displayed (page 8-41).
The air conditioner may cause
overheating. If the warning light is
displayed, turn the air conditioner off
(page 8-21).
NOTE
When maximum cooling is desired,
set the temperature control dial to
the extreme cold position and set
the air intake selector to the
recirculated air position, then turn
the fan control dial fully clockwise.
If warmer air is desired at floor level,
press the
switch and adjust the
temperature control dial to maintain
maximum comfort.
Advertisement
