Advertisement
Driving
Blind Spot Monitoring (BSM)
How to Use the Blind
Spot Monitoring (BSM)
When the BSM operates
The BSM operates when all of the
following conditions are met.
The vehicle speed is about 10 km/h
(6.2 mph) or faster.
The system detects an approaching
vehicle.
When the BSM operates, the driver is
notified of the presence of an
approaching vehicle using the BSM
warning lights and a screen display
*1
(white)
.
BSM warning light
Instrument cluster
Active driving display
5-128
*
1
The instrument cluster screen display (white)
is displayed only when the instrument
cluster is set to the i-ACTIVSENSE display.
When the turn signal lever is operated
in the direction in which an
approaching vehicle is detected, the
driver is notified of the danger by
flashing of the BSM warning lights, the
warning sound, and the warning
indication (amber).
BSM warning light
Instrument cluster
Active driving display
NOTE
The BSM may not operate normally if
any of the following conditions is
met.
The rear side radar sensors cannot
detect an object.
Advertisement
