Section 6. Amazon Alexa Light Control; Section 7. Troubleshooting - Jandy Infinite WaterColors IWCP50W100 Installation And Operation Manual

ENGLISH

Section 6. Amazon Alexa Light Control

Go to iaqualink.com for more information on controlling your Infinite WaterColors lights through Amazon Alexa.

Section 7. Troubleshooting

Problem
Light don't turn on
Lights are flashing yellow
Lights are on, but not switching to the
selected color
Some of my lights come on, but not
others
Page 10
Jandy Infinite WaterColors
®
Possible Cause
Light Controller is not powered
Light Controller is not communicating to
automation
Lights are not powered
Lights has failed
Lights are powered but not
communicating to the Light Controller
Non-compatible lights are connected
Lights are in a different zone than the
one being switched
Lights are in separate zones
|
LED Light Controller Installation & Operation Manual
™
Corrective Action
Check supply power, LED2 should be on.
Check that RS4-85 is connected, LED1
should be blinking.
Check that the light is wired to the Light
Controller output.
Replace the light or swap the PCBA
(for niched pool and spa LED lights only).
Check that lights are wired to the Light
Controller. Other transformers are not
compatible.
Check that Infinite WaterColors Lights
are connected. Other lights are not
compatible.
Ensure lights are in the zone selected.
Ensure lights are in the zone selected.