Installing Wlan Antennas; Installing A 4G Sim Card - HP MSR 93 Series Installation Manual

Table of Contents

Advertisement

4.
Attach the female connector of the cable to the router.
Figure 14 Installing the 3G/4G antenna extension cable to a 3G device
3G/4G antenna
extension cable
1

Installing WLAN antennas

1.
Change the angle of the antenna orientation from vertical to horizontal.
2.
Attach the antenna to the router, as shown in Figure 15. Avoid over-tightening.
3.
Install the other antenna in the same way.
Change the antenna orientation to vertical to achieve better signal coverage.
Figure 15 Installing WLAN antennas

Installing a 4G SIM card

CAUTION:
Do not install or remove a 4G SIM card when the router is powered on.
To avoid damage to the holder, use proper strength when you install the 4G SIM card.
The JG596A router supports the following frequency ranges:
4G—700 MHz
3G—800/1900 MHz CDMA
The JG665A router supports the following frequency ranges:
M6
M3
Antenna extension
M2.9
cable bracket
2
13

Advertisement

Table of Contents
loading

Table of Contents