Maintenance - Nordmende CTG51LPGBK Operating And Installation Instructions

5. Part : CLEANING AND MAINTENANCE
Burner Caps:
Periodically, enameled pan support, enameled covers, burner heads must be
washed with soapy warm water rinsed and dried. After drying them thoroughly,
replace them correctly.
Enamelled Parts:
In order to keep them a new, it is necessary to clean them frequently with mild
warm soapy water and then dry with cloth. Do not wash them while hot and
never use abrasive powders or abrasive cleaning materials. Do not leave
vinegar, coffee, milk, salt, water, lemon, or tomato juice to remain in contact
with enameled parts for long periods of time.
Stainless Steel:
Stainless steel parts must be cleaned frequently with mildly warm soapy water
and a soft sponge and then dry with a soft cloth. Do not use abrasive powders
or abrasive cleaning metarials. Do not leave vinegar, coffee, milk, salt, water,
lemon or tomato juice to remain in contact with stainless steel parts long
periods of time.

5.2 Maintenance

Change of Oven Lamp
At first plug the oven off from electric supply and make sure that oven is cool.
Remove the bulb after removing the cover in front of lamp. Assemble the new
bulb resistant to 300°C to the place of the bulb that you removed (230 V, 25
Watt, Type E14). Place the lamp protective glass. Your oven will be ready for
use after this process.
Other Controls
Periodically check the gas connection pipe. Even if any simple abnormality is
felt, inform the technical service to have it changed. We recommend the gas
connection parts to be changed once a year. If any abnormality is felt while
operating the control knobs of cooker and oven, contact to the authorized
service.
23