General Warnings And Measures; Gas Conversions - Nordmende CTG51LPGBK Operating And Installation Instructions

3. Part : INSTALLATION AND PREPARATIONS FOR USE

3.6 General warnings and measures

Your appliance is produced in accordance with the local and international
•
standards and regulations applicable.
The maintenance and repair works must be made only by authorized service
•
technicians. The installation and repair works without following proper
knowledge may endanger you
While your appliance operates, its outside surfaces heat up. The interior
•
surfaces of oven, and the flue outlets are quite hot. Even if the appliance is
turned off, these parts keep its heat for a specific time. Do not touch onto
hot surfaces, and keep children away
Do not leave the cooker while cooking with solid or liquid oils. They may
•
catch fire on condition of extreme heating. Never pour water to the flames
that are caused by oil. Cover the saucepan or frypan with its cover in order
to choke the flame that has occured in this case and turn the cooker off
The oven and heat adjustment switches must be adjusted for cooking in your
•
oven. Otherwise the oven does not operate.
When the door or drawer of oven is open do not leave anything on it . You
•
may unbalance your appliance or break the cover
Do not put heavy things or flammable or ignitable goods (nylon, plastic
•
bag,paper,cloth...etc) into the lower drawer. This includes cookware with
plastic accessories (e.g. handles).
Plug the appliance off the electrical network when you do not use the
•
appliance and keep the gas valve off.
Protect your appliance against atmospheric effects. Do not leave it to effects
•
such as sun, rain, snow, powder etc.
Remember that this appliance is designed for indoor use.
•

3.7 Gas conversions

Caution : The following procedures must be undertaken by authorized
service personnel.
Your appliance is adjusted to be operated with NG/LPG gas. The gas burners
can be adapted to different types of gas, by replacing the corresponding
injectors and adjusting minimum flame length suitable to the gas in use. For
this purpose, following steps should be performed
.
.
11
.
:
.