4. Part : USE OF YOUR OVEN
Pan anti-tilting wire
Removal of wire shelf
Telescopic rails
Figure 13
Pull the wire
shelf as shown in
the picture. After
releasing it from
clips, lift it up.
Remove G
screws on the
each catalitic
enamel coated
Figure 14
panel.
Installation of the Shelves
Figure 16
•
To locate grid correctly in the cavity,
put it to any rack and push the grid
up to the end.
•
The pan anti-tilting wire must be
placed inside of the cavitiy.
Removal of catalitic panel
21
Figure 15
5. Rack
4. Rack
3. Rack
2. Rack
1. Rack
Figure 17