Part : Cleaning And Maintenance; Cleaning - Nordmende CTG51LPGBK Operating And Installation Instructions

5. Part : CLEANING AND MAINTENANCE

5.1 Cleaning

Be sure that all control switches are off and your appliance cooled before
cleaning your oven. Plug off the appliance. Check whether they are appropriate
and recommended by the manufacturer before using the cleaning materials on
your oven. As they may damage the surfaces, do not use caustic creams,
abrasive cleaning powders, thick wire wool or hard tools. In case the liquids
that overflow around your oven burn, the enameled parts may be damaged.
Immediately clean the overflown liquids.
Cleaning of Inside of Your Oven
Surely plug off the oven before starting cleaning. The inside of enameled oven
is cleaned in the best way when the oven is warm. Wipe the oven with a soft
cloth that had been soaked in soapy water after each use. Later wipe it with a
wet cloth once more and then dry it. It may be required to use a liquid cleaning
material from time to time and make a complete cleaning. Do not clean with
dry/powder cleaners or steam cleaners.
Cleaning of Your Oven Cover
In order to be able to clean the cover of your oven from inside and outside, use
a glass cleaner. Then rinse, dry it with a dry cloth.
Cleaning of Gas Cooker - Hob Part
• Lift up the saucepan supports, caps and crowns of hob burners.
Wipe and clean the back panel with a soapy cloth.
•
Wash the caps and crowns of hob burners and rinse them. Do not leave
•
them wet, immediately dry them with paper cloth.
• After cleaning, make sure that you re-assemble the parts correctly.
Do not clean any part of the hob with metal sponge. It causes the surface be
•
scratched.
The pan support top surfaces may be scratched in time due to usage. These
•
parts will not get rusted and it is not a production fault.
During cleaning of the hob plate, make sure that no water flows inside the
•
burner cups, as this may block the injectors.
22