Electric Connection And Security - Nordmende CTG51LPGBK Operating And Installation Instructions

3. Part : INSTALLATION AND PREPARATIONS FOR USE

3.5 Electric connection and security

During the electric connection, follow the instructions stated in the user
manual .
The earthing cable must be connected to the earth terminal
•
You have to ensure the power cord with suitable insulation to be connected
•
to the power source during the connection If there is no appropriate earthed
electric outlet in accordance with regulations in the place where the
appliance will be installed, immediately contact to our authorized service.
The earthed electric outlet must be close to the appliance.
Do not use an extension cord
•
• The power cord must not touch to the hot surface of the product.
In case the cord is damaged, contact Authorized Service to have it changed
•
• Any wrong electric connection may damage your appliance, as well as
endangering your safety, rendering your guarantee invalid
The appliance is adjusted for 230V 50Hz electricity. If the network electricity
•
is different than this value, immediately contact your authorized service
The supply cord should be kept away from hot parts of appliance. Otherwise
•
the cord may be damaged, causing short circuit.
The producer firm declares that it has no responsibility against any kind of
•
damages and losses that are caused by improper connections that are
performed by unauthorized people
.
.
L
N
Figure 7
.
10
.
.
.
.