Table of Contents
Advertisement
Chapter 1 Installing Windows
7. Click menu of left pane or edit button
After completion, click Accept Configuration to start installation.
Confirm the settings and specify any required settings.
OS Setting
On the following "Operating System", specify settings for the OS installation.
Password can be used alphanumeric characters only.
If a sign (such as "!") is included, an error message will appear.
Set your time zone.
You can enable the functions of Windows, if necessary.
Install the HyperV role on this system
Enable Windows Firewall
Storage controller
Choose the RAID controller of installation destination.
Partition of the OS volume
Specify the any partition size, and then remove the choice of Use Recommended Partition.
Enter the partition size of Basic data partition to installation destination (Unit: MB *), or specify it
with percentage. The following partitions cannot be changed.
When choosing Use Recommended Partition, the OS is installed using all area of a hard disk
drive.
on the item you want to edit to confirm and modify details.
Tips
When you configure RAID system from EXPRESSBUILDER, the system reboots
automatically after clicking Accept Configuration.
After reboot, EXPRESSBUILDER starts automatially and resumes from the next
procedure. Wait a moment without any operation.
－ Recovery
－ EFI system partition
－ Microsoft reserved partition
Installation Guide (Windows Server 2019)
3. Installing Windows Server 2019
The HyperV role can be Enabled.
Windows Firewall can be Enabled.
35
Advertisement
Table of Contents
