Advertisement
CHANGING A PROGRAM
To change the running program it is necessary:
•
to interrupt the running program (see "I
•
select the new program;
•
start the program (see "S
WARNING!
Some models are fitted with a static system to optimise water consumption. When
a programme is started or changed, the dishwasher performs a pump-out followed by
a standby phase (about 10 min.) during which it will make absolutely no noise; the
actual washing process starts after this time.
ANNULLING A PROGRAM
To annul the program
•
press the START/PAUSE button (3 ) for a few seconds; the light of
the phase in progress remains on and the light of the program in
progress flashes (confirmation beep);
•
Keep the START/PAUSE button (3) pressed until the PROGRAM
PHASES lights (5) go out (confirmation beep). "
the DISPLAY and pump-out of the water in the tank will begin,
ending the program at the point where it was interrupted. When the
operation is complete, the PHASES/PROGRAM LIGHTS (5) flash.
The water in the tank will be pumped out and the program will end at the
point where it was interrupted. When the operation is complete, the
PROGRAM PHASES lights (5) flash.
In case that the door is opened during the operation, to the next door
closing it is going to be necessary to start the program as shown in
paragraph "
point in which it was interrupted.
In case that the tub temperature is higher than 50°C the program
will start about 60 seconds later.
ENERSAVE
This option can be selected with the wash programme of choice to
further reduce energy consumption. Drying is aided by a special
device that automatically releases the door, which opens slowly and
smoothly by a few centimetres. This ensures perfect drying and greater
control of rinsing temperatures, which can be kept at lower levels for
significant energy saving. Once the door has opened, the end of the
wash cycle is indicated by a short beep.
12
User instructions
TARTING THE PROGRAM
S
TARTING THE PROGRAM
NTERRUPTION A PROGRAM
").
". The program will resume from the
");
P0 P0 P0 P0
" will appear on
Advertisement
