Table of Contents
Advertisement
9. Attach the upper end of the Storage Latch (68)
to the Frame (66) with a 3/8" x 1 3/4" Bolt (6)
and a 3/8" Nut (10). Note: It may be necessary
to move the Frame back and forth to align the
Storage Latch with the Frame.
10. Attach the two Rear Foot Pads (71) to the bot-
tom of the crossbar on the Frame (66) with four
#8 x 3/4" Tek Screws (11). Be careful not to
overtighten the Screws.
Lower the Frame (66) (see HOW TO LOWER
THE TREADMILL FOR USE on page 28).
11. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used
to adjust the walking belt (see page 30).
9
10
66
71
11
11
13
10
66
6
68
71
Advertisement
Table of Contents
