ICON Solarium COMMERCIAL 1750 User Manual page 11

5. Insert the wires into the right Upright (93) as you
set the console assembly on the Upright. Be
careful not to pinch the Upright Wire (88).
Attach the console assembly with four 5/16" x
1 1/2" Screws (3) and four 5/16" Star Washers
(9). Start all four Screws, and then tighten
them.
6. Identify the Right Handrail (86). Slide the Right
Handrail between the console assembly and the
pulse assembly.
Attach the Right Handrail (86) with two 5/16"
x 2" Screws (4) and a 5/16" x 3 3/4" Screw (5)
as shown. Start all three Screws, and then
tighten them.
Attach the Left Handrail (not shown) to the
console assembly as described above.
5
Console
Assembly
3
9
6
Pulse
Assembly
86
4
11
3
9
93
Console
Assembly
4
5
88