7. Slide the Bracket Cover (100) up on the iPad
Holder (101). Attach the iPad Holder to the con-
sole assembly with two 1/4" x 1/2" Screws (7).
Slide the Bracket Cover (100) down against the
console assembly.
8. Raise the Frame (66) to the position shown.
Have a second person hold the Frame until
step 9 is completed.
Orient the Storage Latch (68) so that the large
barrel and the latch knob are in the positions
shown.
Attach the lower end of the Storage Latch (68)
to the Upright (93) with a 3/8" x 2" Bolt (8) and a
3/8" Nut (10).
7
101
100
8
93
10
Latch
68
Knob
Large
Barrel
12
7
Console
Assembly
66
8