Operation; Cleaning; Troubleshooting (Mq67 - Siemens MQ67 FQ Series Operating Instructions Manual

MQ67115_de-ar.book Seite 9 Mittwoch, 14. Januar 2015 7:13 07

Operation

The appliance is suitable for blending
mayonnaise, sauces, mixed drinks, baby food,
cooked fruit and vegetables.
For puréeing soups.
Use the universal cutter for cutting/chopping
raw food (onions, garlic, herbs)!
It is recommended to use the supplied blender
jug. However, other suitable receptacles can
also be used.
^ííÉåíáçå>
qÜÉ=Äçííçã=çÑ=íÜÉ=êÉÅÉéí~ÅäÉ=ïÜáÅÜ=óçì=ìëÉ=
ãìëí=åçí=Ü~îÉ=~åó=Äìãéë=çê=êÉÅÉëëÉëK

Before using the appliance for the first time,
clean all parts of it.

Fig.

Completely unwind the power cord.

Place the blender foot on the base unit and
lock into position.

Insert the mains plug.

Place food in the blender jug or another tall
receptacle.
The appliance works better if there is some
liquid in the ingredients.

Set the required speed with the speed

control (Fig. -5).
It is recommended to use a low speed setting
for liquids, hot food and for mixing (e.g. muesli
in yoghurt). The high speed settings are
recommended for the processing of more
solid foods.

Firmly hold the hand blender and jug.

Switch on the hand blender by pressing
the required On button.
When switching on the hand blender, hold
it at a slight angle to prevent it from "sticking"
to the bottom of the blender jug.
The hand blender remains switched on as
long as the On button is pressed.
To prevent the ingredients from splashing,
do not press the On button until the blender
foot has been immersed in the ingredients.
Always switch off the hand blender before
taking it out of the processed food.

Release the On button after processing.
After using the appliance:

Remove mains plug.

Press the release buttons and remove the
blender foot from the base unit.

Cleaning

^ííÉåíáçå>
kÉîÉê=áããÉêëÉ=íÜÉ=Ä~ëÉ=ìåáí=áå=äáèìáÇë=~åÇ=Çç=
åçí=ÅäÉ~å=áå=íÜÉ=ÇáëÜï~ëÜÉêK
aç=åçí=ìëÉ=~=ëíÉ~ã=ÅäÉ~åÉê>
pìêÑ~ÅÉë=ã~ó=ÄÉ=Ç~ã~ÖÉÇK=aç=klq=ìëÉ=
~Äê~ëáîÉ=ÅäÉ~åáåÖ=~ÖÉåíëK
If processing e.g. red cabbage and carrots,
the plastic parts will become discoloured by
a red film which can be removed with a few
drops of cooking oil.

Pull out the mains plug!

Wipe the base unit with a damp cloth and
then wipe dry.

The blender jug can be cleaned in the
dishwasher.

Clean the blender foot in the dishwasher or
with a brush under running water.

Dry the blender foot in an upright position
(blender blade face up) so that any trapped
water can run out.
kçíÉW
^ééäá~åÅÉë=ïáíÜ=ëéáê~ä=Å~ÄäÉW=
kÉîÉê=ïáåÇ=íÜÉ=Å~ÄäÉ=~êçìåÇ=íÜÉ=~ééäá~åÅÉ>

Troubleshooting (MQ67...)

Fault Remedial action
The appliance The overload protection
switches off while feature has been activated.
it is being used

Switch off the appliance
or the speed
and pull out the mains
indicator (if fitted)
plug.
starts flashing.

Leave the appliance to cool
down for approx. 1 hour
in order to deactivate
the overload protection
device.

Switch on the appliance
again.
If the fault cannot be eliminated, please contact
customer service.
en
9