Operation - Siemens MQ67185 Operating Instructions Manual

Hide thumbs Also See for MQ67185:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 10
MQ67185_de-kk-ar.book Seite 13 Dienstag, 12. August 2014 11:31 11

Operation

Warning!
The bottom of the receptacle which you use
must not have any bumps or recesses.
Before using the appliance for the first
time, clean all parts of it.
Blender foot
The blender foot is suitable for blending
mayonnaise, sauces, mixed drinks, baby
food, cooked fruit and vegetables.
For puréeing soups.
It is recommended to use the supplied
blender jug. However, other suitable
receptacles can also be used.
Fig.
Completely unwind the power cord.
Place the blender foot on the base unit
and lock into position.
Insert the mains plug.
Place food in the blender jug or another
tall receptacle.
The appliance works better if there is
some liquid in the ingredients.
Set the required speed with the speed
control (Fig.
-5).
It is recommended to use a low speed
setting for liquids, hot food and for mixing
(e.g. muesli in yoghurt).
The high speed settings are recommen-
ded for the processing of more solid
foods.
Firmly hold the hand blender and jug.
Switch on the hand blender by pressing
the required On button.
When switching on the hand blender,
hold it at a slight angle to prevent it from
"sticking" to the bottom of the blender jug.
The hand blender remains switched on
as long as the On button is pressed.
To prevent the ingredients from
splashing, do not press the On button
until the blender foot has been immersed
in the ingredients.
Always switch off the hand blender before
taking it out of the processed food.
Release the On button after processing.
After using the appliance:
Remove mains plug.
Press the release buttons and remove
the blender foot from the base unit.
Multifunction accessory
The multifunction accessory is suitable for
cutting and shredding food.
Risk of injury from sharp blades/
rotating drive!
While the appliance is operating, never
place fingers in the mixing bowl. Always
use the pusher for adding ingredients.
After switching off, the drive continues
running for a short time. Change tools only
when the drive is at a standstill.
When working with the multifunction
accessory, the base unit may be switched
on only when the lid has been attached and
screwed on tight.
Warning!
Multifunction accessory must be completely
assembled before use!
Caution!
Before cutting meat, remove gristle, bones
and sinews.
The multifunction accessory is not suitable
for cutting very hard food (coffee beans,
radishes, nutmeg) and frozen food (fruit,
etc.).
Universal blade
For cutting meat, hard cheese, onions, herbs,
garlic, fruit, vegetables, nuts, almonds
Always observe the maximum quantities and
processing times in the table (Fig.
The blade is sharp and can cause
injury!
Never grip the blades of the universal
blade.
Take hold of the universal blade by the
plastic handle only.
Do not touch blade with bare hands.
Clean them with a brush.
Fig.
Place bowl on a smooth and clean work
surface.
Insert universal blade.
Add food.
Warning!
Universal blade must be upright in the bowl
so that the lid fits correctly (Fig.=  -3).
en
).
13

Advertisement

Table of Contents
loading

Table of Contents