DeLonghi ECAM37X.95 Instructions For Use Manual page 20

DISPLAYED MESSAGE
ADD GROUND COFFEE MAX.
ONE MEASURE
FILL BEANS CONTAINER
GROUND TOO FINE. ADJUST
MILL
SELECT A MILDER TASTE OR
REDUCE COFFEE AMOUNT
POSSIBLE CAUSE
A LONG coffee with pre-ground coffee has been
requested
The coffee beans have run out.
The pre-ground coffee funnel (A4) is clogged.
The grinding is too fine and the coffee is deliv-
ered too slowly or not at all.
If the water softener filter (D7) is present, an
air bubble may have been released inside the
circuit, obstructing delivery.
Too much coffee has been used.
REMEDY
Place pre-ground coffee in the funnel (A4) (fig.
12) and press the selector corresponding to
"OK" to continue and complete delivery.
Fill the beans container (A4) (fig. 10).
Empty the funnel with the help of the brush
(D5) as described in section "13.8 Cleaning the
pre-ground coffee funnel".
Repeat coffee delivery and turn the grinding
adjustment dial (A5) (fig. 13) one click clock-
wise towards "7" while the coffee mill is in
operation. If after making at least 2 coffees
delivery is still too slow, repeat the correction
procedure, turning the grinding adjustment
dial another click until delivery is correct (see
section "7.5 Adjusting the coffee mill"). If the
problem persists, make sure the water tank
(A17) is fully inserted.
Insert the hot water spout (D6) in the appli-
ance and deliver a little water until the flow
becomes regular.
Select a milder taste by pressing the "AROMA"
button (C5) or reduce the quantity of ground
coffee (maximum 1 measure).
20