DeLonghi DINAMICA plus Instructions For Use Manual

Bean to cup espresso and cappuccino machine
Hide thumbs Also See for DINAMICA plus:
Table of Contents

Advertisement

ECAM37X.70
BEAN TO CUP ESPRESSO AND
CAPPUCCINO MACHINE
Instructions for Use
Instructions videos available at:
http://dinamicaplus.delonghi.com

Advertisement

Table of Contents
loading

Summary of Contents for DeLonghi DINAMICA plus

  • Page 1 ECAM37X.70 BEAN TO CUP ESPRESSO AND CAPPUCCINO MACHINE Instructions for Use Instructions videos available at: http://dinamicaplus.delonghi.com...
  • Page 3 page 4 READY...
  • Page 4: Table Of Contents

    CONTENTS 11. CUSTOMISING THE BEVERAGES ....12 1. INTRODUCTION ...........5 12. CLEANING ..........13 Letters in brackets ............ 5 12.1 Cleaning the machine ..........13 Troubleshooting and repairs........5 12.2 Cleaning the internal circuit ........13 12.3 Cleaning the coffee grounds container ....13 2.
  • Page 5: Introduction

    1. INTRODUCTION B3. Directly selected beverages B4. Scroll arrow Thank you for choosing this bean to cup espresso and cappuc- B5. Quantity selected cino machine. B6. Descale required alarm Take a few minutes to read this Instruction for Use. This will B7.
  • Page 6: Turning The Appliance On

    • To improve the performance of your appliance, we recom- mend installing a water softener filter (D6) as described in section "15. Water softener filter". If your model is not provided with a filter, you can request one from De'Longhi customer services.
  • Page 7: Menu Settings

    Danger of scalding! 6.6 Beverages settings During rinsing, a little hot water comes out of the coffee spouts In this section, you can consult your customised settings and, if (A9) and is collected in the drip tray (A15) underneath. Take care you wish, reset the default values for each beverage.
  • Page 8: Water Hardness

    Please note: Varying the temperature has most effect for long beverages. 6.10 Water hardness For instructions on setting water hardness, see section "14. Set- ting water hardness". 6.11 Set language To modify the language of the display, proceed as follows: "...
  • Page 9: Selecting The Coffee Aroma

    etc.). Their meaning is explained in section "17. Displayed • Never use more than 1 level measure (D2) as it could soil messages". the inside of the coffee machine or block the funnel (A4). • For hotter coffee, see section "7.6 Tips for a hotter coffee". •...
  • Page 10: Tips For A Hotter Coffee

    To make the beverage, proceed as follows: Selected quantity Quantity (ml) * ≃ 250 ≃ 500 ≃ 750 (*) The quantities indicated are approximate and may vary ac- cording to the type of coffee. Press "COFFEE POT"; Please note! Select the aroma and number of cups; The grinding adjustment dial must only be turned when the Press to move on to the next step.
  • Page 11: Adjusting The Amount Of Froth

    2. Fill the milk container (E3) with a sufficient quantity of milk, not exceeding the MAX level marked on the container (fig. 14). Each mark on the side of the container corresponds to about 100 ml of milk; 8. Follow the instructions below for each function. 9.2 Adjusting the amount of froth Turn the froth adjustment dial (E1) to adjust the amount of froth on the milk delivered while making cappuccinos and milk-based...
  • Page 12: Cleaning The Milk Container After Use

    Once the coffee has been made, the appliance is ready to make the next beverage. Please note! general indications when preparing all milk- based beverages • : press to interrupt preparation completely and go back to the homepage. • : press to interrupt milk or coffee delivery and move on to the next delivery (if applicable) to complete the beverage.
  • Page 13: Cleaning

    Important! 3. (Coffee beverages only) Select the required aroma by • Do not use solvents, abrasive detergents or alcohol to clean pressing “-” or “+” and press the coffee machine. With De’Longhi superautomatic coffee 4. Preparation begins and the appliance displays the quantity machines, no chemical products are required for cleaning customising screen in the form of a vertical bar.
  • Page 14: Cleaning The Drip Tray And Condensate Tray

    2. Empty the drip tray and grounds container and clean thor- oughly to remove all residues left on the bottom. This can be done using the spatula on the brush (D5) provided. 3. Check the condensate tray (A10) (red) and empty if necessary.
  • Page 15: Cleaning The Milk Container

    Important! The infuser cannot be extracted while the machine is on. 1. Make sure the machine is correctly turned off (see section "5. Turning the appliance off"); 2. Remove the water tank (A17) (fig. 2); 3. Open the infuser door (A19) (fig. 25) on the right side of the appliance;...
  • Page 16: Cleaning The Hot Water Nozzle

    pliance needs descaling. (The message appears each time you turn the appliance on). To access the descaling menu: 1. Pressthe “ ” button (C3) to enter the menu; 2. Press "DESCALE" and follow the instructions on the display; 3. "REMOVE WATER FILTER" (fig. 33): extract the water tank (A17), remove the water softener filter (D6) (if present) and empty the tank.
  • Page 17: Setting Water Hardness

    8. Press to confirm that you have added the container (A11), then put back in the appliance. Press descaling solution. "DESCALING UNDERWAY" "PLEASE WAIT" is displayed: The descale programme starts and 19. "DESCALE COMPLETE": press the descaler liquid comes out of the hot water and coffee 20.
  • Page 18: Water Softener Filter

    of the openings at the side for more than a minute. Press Indicator paper Water hardness Level 1 - soft water 5. Extract the tank (A17) from the appliance and fill with water. Level 2 - slightly hard 6. "IMMERSE FILTER TO" "EXPEL AIR BUBBLES" (fig. 39): Insert water the filter in the water tank and immerse it completely for Level 3 - hard water...
  • Page 19: Removing The Filter

    15.3 Removing the filter If you want to use the appliance without the filter (D6), you must remove it and notify the appliance of its removal. Proceed as follows: 1. Extract the tank (A17) and exhausted filter; 2. Access the menu as described in section "6.1 Access the settings menu";...
  • Page 20: Displayed Messages

    17. DISPLAYED MESSAGES DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY FILL TANK WITH FRESH Insufficient water in the tank (A17). Fill the tank with water and/or insert it correct- WATER ly, pushing it as far as it will go until it clicks into place.
  • Page 21 DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY ADD GROUND COFFEE MAX. Preparation with pre-ground coffee has been Make sure the funnel (A4) is not blocked, then ONE MEASURE selected. add one level measure (D2) of pre-ground coffee, press “Next” on the display and follow the instructions in section "7.4 Making coffee using pre-ground coffee".
  • Page 22 DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY INSERT MILK CONTAINER The milk container (E) is missing or not correct- Insert the milk container, pushing it as far as ly in place. it will go. INSERT INFUSER ASSEMBLY The infuser (A20) has not been replaced after Insert the infuser as described in section "12.9 cleaning.
  • Page 23 DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY DESCALING INTERRUPTED Descaling has been interrupted or has not been Press NEXT to resume descaling. For more in- PRESS NEXT TO CONTINUE completed correctly. formation, see section "13. Descaling". TURN MILK FROTH Milk has been delivered recently and the tubes Turn the froth adjustment dial (E1) to CLEAN ADJUSTMENT DIAL TO CLEAN inside the milk container (E) must be cleaned.
  • Page 24: Troubleshooting

    DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY REPLACE WATER FILTER The water softener filter (D6) is exhausted. Press the selector corresponding to "OK" to re- PRESS OK TO START place or remove the filter, or "ESC" to carry out the procedure later. Follow the instructions in section "15.
  • Page 25 PROBLEM POSSIBLE CAUSE REMEDY The coffee is not hot. The cups were not preheated. Warm the cups by rinsing them with hot water (Please note: you can use the hot water function). The internal circuits of the appliance Before making the coffee, heat the infuser by have cooled down because 2/3 min- rinsing using the rinse function (see section utes have elapsed since the last coffee...
  • Page 26 PROBLEM POSSIBLE CAUSE REMEDY The infuser cannot be removed The appliance has not been turned off Turn the appliance off by pressing the but- correctly ton (A15) (see section "5. Turning the appliance off"). At the end of descaling, the appliance During the two rinse cycles, the water Follow the instructions displayed by the appli- requests a third rinse...
  • Page 28 De’Longhi Appliances via Seitz, 47 31100 Treviso, Italy www.delonghi.com...

This manual is also suitable for:

Ecam37x.70

Table of Contents