Data Verification; How To Learn More About Toshiba Disc Creator; Media Care - Toshiba Tecra M11-SP4002 User Manual

Toshiba tecra m11-sp4002: user guide

Table of Contents

Data Verification

To verify that data has been written or rewritten correctly to a data CD/DVD

you should follow the steps below before you begin the write/rewrite

process:

1. Display the setting dialog box by one of the following two steps:

■

2. Mark the Verify Written Data check box.

3. Select File Open or Full Compare mode.

4. Click the OK button.

Please refer to the Help files for additional TOSHIBA Disc Creator

information.

This section provides tips on protecting data stored on your CD's and

DVD's. Handle your media with care. Following the simple precautions

listed below will increase the lifetime of your media and protect the data

stored on it.

1. Store your CD's and DVD's in the containers they originally came in to

protect them and keep them clean.

2. Do not bend the CD's or DVD's.

3. Do not write on, apply a sticker to, or otherwise mar the surface of the

CD or DVD that contains the data.

4. Hold the CD or DVD by its outside edge or the edge on the center hole -

any fingerprints on the surface of the disc can prevent the drive from

properly reading data.

5. Do not expose the CD or DVD to direct sunlight, extreme heat or cold.

6. Do not place heavy objects on your CD's or DVD's.

7. If your CD's or DVD's become dusty or dirty, wipe them with a clean dry

cloth from the center hole outwards - do not wipe in a circular direction.

If necessary, you can use a cloth that has been lightly dampened in

water or a neutral cleaner but you must not use benzine, thinner or any

Table of Contents