Dual Pointing Device - Toshiba Tecra M11-SP4002 User Manual

Problem
You cannot read a file Check to ensure the required file is actually on

Dual Pointing device

If you are using a USB mouse, you should also refer to both the
device
mouse.
Touch Pad/AccuPoint
Problem
Either the Touch Pad
or the AccuPoint does
not work.
On-screen pointer
does not respond to
pointing device
operation
Double-tapping
(Touch Pad) or
double-clicking
(AccuPoint) does not
work
The on-screen pointer
moves too fast or too
slow
User's Manual
Procedure
the MultiMediaCard that is inserted into the
computer.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
section in this chapter, and the documentation supplied with your
Procedure
Check the Device Select settings.
Click Start
Sound
Pressing FN + F9 to enables.
In this instance the system might be busy - Try
moving the mouse again after waiting a short
while.
In this instance, you should initially try changing
the double-click speed setting within the Mouse
Control utility.
1. To access this utility, click Start
2. Within the Mouse Properties window, click
3. Set the double-click speed as required and
In this instance, you should initially try changing
the speed setting within the Mouse Control utility.
1. To access this utility, click Start
2. Within the Mouse Properties window, click
3. Set the pointer speed as required and click
Control Panel
Mouse.
Panel Hardware and Sound
the Buttons tab.
click OK.
Panel Hardware and Sound
the Pointer Options tab.
OK.
Troubleshooting
USB
Hardware and
Control
Mouse.
Control
Mouse.
8-13