Disabling Or Enabling Wireless Devices - Toshiba Tecra M11-SP4002 User Manual

Disabling or enabling wireless devices

Fn + F8 is a hotkey which allows you to control (enable or disable) wireless
devices on the computer.
The wireless modes are:
■
Enable all Devices: Enables the Wi-Fi
modules.
■
Disable all Devices: Disables the Wi-Fi
modules.
■
Enable or Disable Wi-Fi
■
Enable or Disable Bluetooth
module.
■
Enable or Disable Wireless WAN: Enables or disables just the Wireless
WAN module.
This hotkey is available only when the Wireless communication switch is
turned on.
Enabling GPS
Your system may include built-in GPS (Global Positioning System)
functionality.
To enable and use GPS, you must do the following procedures.
■
Please make sure that the Wireless communication switch is turned on.
■
Insert a SIM card into the SIM card slot.
■
Start TOSHIBA GPS utility from Start
TOSHIBA Wireless Manager and then click start on the window.
■
Use (Install) a MAPPING software to view the location on the MAP.
■
Please note that the GPS function may not be supported depending on
the model you purchased.
■
The performance of GPS will vary depending on the environment.
There may be times when a location cannot be determined.
User's Manual
® : Enables or disables just the Wi-Fi
™
: Enables or disables just the Bluetooth
Wireless Modes window (sample image)
Operating Basics
® ™
, Bluetooth and Wireless WAN
® ™
, Bluetooth and Wireless WAN
All Programs
® module.
™
TOSHIBA
4-37