Toshiba Tecra M11-SP4002 User Manual page 155

USB-FDD Legacy Emulation
Use this option to enable or disable USB floppy diskette drive legacy
emulation. If your operating system does not support USB, you can still use
a USB floppy diskette drive by setting the USB-FDD Legacy Emulation
item to Enabled.
Enabled
Disabled
SATA
eSATA
This feature allows you to set conditions for SATA.
Enabled
Disabled
SATA Interface setting
This feature allows you to set SATA interface setting.
Performance
Battery life
User's Manual
Enables the USB floppy diskette drive legacy
emulation function (Default).
Disables the USB floppy diskette drive legacy
emulation function.
Enables the eSATA port. (Default)
Disables the eSATA port in order to save power.
Let HDD/SSD work with maximum performance.
(Default)
Let HDD/SSD work with battery life mode. If this
setting is selected, this caused performance
down.
HW Setup
7-6